amphenol circular interconnects d-11 mil-c-38999 series ii jt series bayonet coupled crimp circular connectors features ? lightweight space-saving design ? durability ? 500 cycles ? emi shielded optional customer options shell sizes ? 9 contact arrangements ? 100+ circuit sizes ? 1 to 128 specifications operating temperature ? -55oc up to 200oc current rating contact size 20 ? 7.5a contact size 16 ? 13a voltage rating (sea level) service rating i ? 600vac(rms) service rating ii ? 900vac(rms) tooling crimp tool ? m22520/1-01 positioner ? m22520/1-04 insert/remove* ? m81969/14-03** insert/remove* ? m81969/14-10*** * plastic tool ** for size 16 contacts. *** for size 20 contacts related information detailed catalogue ? 12-090-14 solder, pcb, wire wrap, coax, fiber & filter optional part number system: (refer to part number make-up for assistance ? opposite) jt xx xx-xx-x x x (x) connector type deviations jt: standard mil-c-38999 ii jts: high temperature jtn: chemical & fuel resistant shell style 00: wall mount receptacle 01: line receptacle alternate keying 02: box mount receptacle blank: normal position 06: straight plug see detailed catalogue for variations 07: jam-nut receptacle 08: 90o plug (aao) contact style i: solder mount rec. (hermetic only) p: pins s: sockets service class rp: potting boot + grommet insert arrangements re: environmental sealed can add sr see insert arrangement table rt: environmental w/o rear accessory (page d-12 and d-13) y: hermetically sealed a: fixed solder contacts (ltd only) shell size for cadmium-free zinc cobalt plating consult representative sr = strain relief see insert arrangement table (page d-12 and d-13) jt accessories ? cable clamp for crimp type housing (if ordered separately to connector) part number system: finish (-xx9 standard) diagram chromate treat -xx0 anodic coating -xx5 cadmium plated nickel base -xx7 olive drab, cadmium, nickel base -xx9 10-405982-xxx shell size 8/10/12/14/16/ 18/20/22/24 finish see adjacent table electroless nickel -xxg jt accessories ? heat shrinkable backshells (shielded) backshell configuration (-x) part number: shell size finish type -1 -2 -3 diagram abk a-war- x 8 abk a-wbr- x 10 abk a-wcr- x 12 abk a-wdr- x 14 abk a-wer- x 16 abk a-wfr- x 18 abk a-wgr- x 20 abk a-whr- x 22 abk a-wjr- x 24 olive drab cadmium shielded straight 45o right angle alternatives: unshielded replace r with u, electroless nickel replace w with f. jt accessories - caps part numbers: shell size cap & chain for plugs cadmium plate, ni base chain length cap & chain for receptacle cadmium plate, ni base chain length 8 10-241801-089 10-241800-089 10 10-241801-109 76.2mm 10-241800-109 76.2mm 12 10-241801-129 10-241800-129 14 10-241801-149 10-241800-149 16 10-241801-169 10-241800-169 18 10-241801-189 88.9mm 10-241800-189 88.9mm 20 10-241801-209 10-241800-209 22 10-241801-229 10-241800-229 24 10-241801-249 101.6mm 10-241800-249 101.6mm diagram alternate cap finishes (replace last digit): 0=chromate, 5=anodic, g=electroless ni connectors individually packaged with crimp contacts ( bulk contacts available) and insert/extract tool. asf/ltd/aao part number make-up jt00? jts00? jtn00? wall mount receptacle part number make-up jt01? jts01? jtn01? line receptacle part number make-up jt02re? jts02re? jtn02re? cannot add sr box mount receptacle part number make-up jt07? jts07? jtn07? jam nut receptacle part number make-up jt06? jts06? jtn06? straight plug ms part numbering system contacts variations: see page d-13 for a list of pins, sockets, coax and power contacts available finish suffix w/sr suffix cadmium plated ni base (sr) olive drab cadmium plated, ni base (014) (386) electroless ni (023) (424) anodic coating (alumilite) (005) (300) chromate treated (iridite 14-2) (011) (344)
|